Publications
List of Papers in SCI/Scopus Journals
| Sr.No. | Paper | Link |
| 1 | Yadav, J., Yadav, D., Vashistha, R., Goyal, D.P., Chhabra, D. (2019) Green energy generation through PEHF–a blueprint of alternate energy harvesting. International Journal of Green Energy, 16 (3), pp. 242-255. (IF-1.302) | View |
| 2 | Vashistha, R., Kumar, P., Dangi, A. K., Sharma, N., Chhabra, D., & Shukla, P. (2019). Quest for cardiovascular interventions: precise modeling and 3D printing of heart valves. Journal of biological engineering, 13(1), 12. (I.F.- 2.667) | View |
| 3 | Dhankhar, R., Kumar, A., Kumar, S., Chhabra, D., Shukla, P., Gulati, P.(2019). Multilevel algorithms and evolutionary hybrid tools for enhanced production of arginine deiminase from Pseudomonas furukawaii RS3, Bioresource Technology, 290, pp 1-9. (IF-6.669) | View |
| 4 | Deswal, S., Narang, R., Chhabra, D. (2019) Modeling and parametric optimization of FDM 3D printing process using hybrid techniques for enhancing dimensional preciseness. International Journal on Interactive Design and Manufacturing. 1-18. https://doi.org/10.1007/s12008-019-00536-z. | View |
| 5 | Kumar, V., Kumar, A., Chhabra, D., Shukla, P. (2019) Improved biobleaching of mixed hardwood pulp and process optimization using novel GA-ANN and GA-ANFIS hybrid statistical tools. Bioresource Technology, 271, pp. 274-282. (IF-6.669) | View |
| 6 | Yadav, D., Yadav, J., Vashistha, R., Goyal, D. P., & Chhabra, D. (2019). Modeling and simulation of an open channel PEHF system for efficient PVDF energy harvesting. Mechanics of Advanced Materials and Structures, 16(3), 1-15. (IF-2.873) | View |
| 7 | Vashistha, R., Chhabra, D., Shukla, P. Integrated Artificial Intelligence Approaches for Disease Diagnostics (2018) Indian Journal of Microbiology, 58 (2), pp. 252-255. (IF-1.533) | View |
| 8 | Vashistha, R., Dangi, A.K., Kumar, A., Chhabra, D., Shukla, P. (2018) Futuristic biosensors for cardiac health care: an artificial intelligence approach. 3 Biotech, 8:358, pp.1-11. (IF-1.786) | View |
| 9 | Abrol, S., Chhabra, D. (2018) Experimental investigations of piezoelectric energy harvesting with turbulent flow. International Journal of Mechanical and Production Engineering Research and Development, 8 (1), art. no. IJMPERDFEB201877, pp. 703-710. | View |
| 10 | Kumar, V., Chhabra, D., Shukla, P. (2017) Xylanase production from Thermomyces lanuginosus VAPS-24 using low cost agro-industrial residues via hybrid optimization tools and its potential use for saccharification. Bioresource Technology, 243, pp. 1009-1019. (IF-6.669) | View |
| 11 | Chhabra, D., Bhushan, G., Chandna, P. (2016) Optimal placement of piezoelectric actuators on plate structures for active vibration control via modified control matrix and singular value decomposition approach using modified heuristic genetic algorithm. Mechanics of Advanced Materials and Structures, 23 (3), pp. 272-280. (IF-2.873) | View |
| 12 | Vashist, S.K., Chhabra, D. (2014) Optimal placement of piezoelectric actuators on plate structures for active vibration control using genetic algorithm .Proceedings of SPIE – The International Society for Optical Engineering, 9057. | View |
| 13 | Chhabra, D., Bhushan, G., Chandna, P. (2014) Multilevel optimization for the placement of piezo-actuators on plate structures for active vibration control using modified heuristic genetic algorithm. Proceedings of SPIE – The International Society for Optical Engineering, 9059. | View |
| 14 | Parul Badhwar, Ashwani Kumar, Ankush Yadav, Punit Kumar, Ritu Siwach, Deepak Chhabra and Kashyap Kumar Dubey, (2020) “Improved pullulan production and process optimization using novel GA–ANN and GA–ANFIS hybrid statistical tools” Biomolecules, 10(1), 124; https://doi.org/10.3390/biom10010124 (IF-4.694) | View |
| 15 | Yadav, M., Yadav, D., Kumar, S., Garg, R.K., Chhabra, D. (2019) Experimental & mathematical modeling and analysis of piezoelectric energy harvesting with dynamic periodic loading. International Journal of Recent Technology and Engineering 8(3), pp. 6346-6350. | View |
| 16 | Gupta R. K., Chhabra D., (2019). Reliability assessment on assembly line due to random failure of mechanical component: A case study in an automotive ancillary unit. International Journal of Advanced Science and Technology, Vol. 27, No. 1,pp. 251-258. | View |
| 17 | Chhabra, D., Deswal, S., (2020). Optimization of significant factors for improving compressive strength of ABS in Fused Deposition Modeling by using GA & RSM. IOP Conference Series: Materials Science and Engineering 748(1),012007. | View |
| 18 | D Yadav, D Chhabra, RK Gupta, A Phogat, A Ahlawat, (2020). Modeling and analysis of significant process parameters of FDM 3D printer using ANFIS. Materials Today: Proceedings 21, 1592-1604 . | View |
| 19 | D Yadav, D Chhabra, RK Garg, A Ahlawat, A Phogat, (2020). Optimization of FDM 3D printing process parameters for multi-material using artificial neural network. Materials Today: Proceedings 21, 1583-1591. | View |
| 20 | Dinesh Kumar Saini, Dinesh Yadav, Sunil Pabbi, Deepak Chhabra, Pratyoosh Shukla (2020). Phycobiliproteins from Anabaena variabilis CCC421 and its production enhancement strategies using combinatory evolutionary algorithm approach. Bioresource Technology, 309, pp. 1-9. 123347 (IF-6.669) | View |
| 21 | Ashwani Kumar, Dinesh Yadav, Ramesh Kumar Garg, Ravikant Gupta, Deepak Chhabra (2020), Design and Optimal Placement of PVDF Patches Over a Shoe Transducer for Efficient Energy Harvesting. Design Engineering, 2020, pp. 8-22. (ISSN 0011-9342) | View |
| 22 | B Pratap, R K Gupta, D S Yadav, A. Yadav, D Chhabra, M. Nag (2020). Physical and mechanical characterization of nanoalumina filled resin based dental composites . Materials Today: Proceedings, 28(4), Pages 2171-2173 doi.org/10.1016/j.matpr.2020.04.162. | View |
| 23 | M Khare, R K Gupta, S S Ghosh, D Chhabra (2020). Effect of carbon black on mechanical properties of Al7075/Al2O3/B4C reinforced aluminum composite. Materials Today: Proceedings, 28(4), Pages 2498-2500 doi.org/10.1016/j.matpr.2020.04.803 | View |
| 24 | S Deshwal, A Kumar, D Chhabra (2020). Exercising hybrid statistical tools GA-RSM, GA-ANN and GA-ANFIS to optimize FDM process parameters for tensile strength improvement . CIRP Journal of Manufacturing Science and Technology, https://doi.org/10.1016/j.cirpj.2020.05.009 . (IF-2.991) | View |
| 25 | Dinesh Yadav, Ramesh Kumar Garg, Akash Ahlawat, Deepak Chhabra (2020). 3D printable biomaterials for orthopedic implants: Solution for sustainable and circular economy. Resources Policy 68 (2020) 101767. (IF-3.986) | View |
| 26 | Dinesh Yadav, Ramesh Kumar Garg, Deepak Chhabra, Rajkumar Yadav , Ashwani Kumar, Pratyoosh Shukla (2020). Smart diagnostics devices through artificial intelligence and mechanobiological approaches. 3 Biotech volume 10, Article number: 351. (IF- 2.389 ) | View |
| 27 | Shagun Adlakha, Deepak Chhabra, Pratyoosh Shukla (2020). Effectiveness of gamification for the rehabilitation of neurodegenerative disorders. Chaos, Solitons & Fractals, Volume 140,110192, ISSN 0960-0779, https://doi.org/10.1016/j.chaos.2020.110192. (IF-3.764) | View |
| 28 | Sumit Tiwari, Ravinder Kumar Sahdev, Mahesh Kumar, Deepak Chhabra, Prabhakar Tiwari, G.N. Tiwari (2020). Environmental and economic sustainability of PVT drying system: A heat transfer approach. Environ Prog Sustainable Energy. 2020;e13535. https://doi.org/10.1002/ep.13535 | View |
| 29 | Twinkle Chaudhary, Dinesh Yadav, Deepak Chhabra, Rajesh Gera & Pratyoosh Shukla (2021). Low-cost media engineering for phosphate and IAA production by Kosakonia pseudosacchari TCPS-4 using Multi-objective Genetic Algorithm (MOGA) statistical tool . 3 Biotech, 11:158. (IF-1.786) | View |
| 30 | Mahesh Kumar, Ravinder Kumar Sahdev, Sumit Tiwari, Himanshu Manchanda, Deepak Chhabra,, Hitesh Panchal, Kishor Kumar Sadasivuni (2021). Thermal performance and kinetic analysis of vermicelli drying inside a greenhouse for sustainable development. Sustainable Energy Technologies and Assessments, Volume 44. (IF-3.427) | View |
| 31 | Dinesh Kumar Saini, Amit Rai, Alka Devi, Sunil Pabbi, Deepak Chhabra, Jo-Shu Chang, Pratyoosh Shukla (2021). A multi-objective hybrid machine learning approach-based optimization for enhanced biomass and bioactive phycobiliproteins production in Nostoc sp. CCC-403. Bioresource Technology, Volume 329 (IF-7.539) | View |
| 32 | Amit Khurana, PrinceAllawadhi, Isha Khurana, Sachin Allwadhi, Ralf Weiskirchen, Anil Kumar Banothu, Deepak Chhabra, Kamaldeep Joshi, Kala Kumar Bharani (2021). Role of nanotechnology behind the success of mRNA vaccines for COVID-19. Nano Today, Volume 38, 101142. (I.F 16.907) | View |
| 33 | Sandeep, Deepak Chhabra, R.K. Gupta (2021). Optimization of FDM Printing Parameters for Surface Quality Improvement of Carbon Based Nylon (PA-CF) Composite Material Fabricated Parts Using Evolutionary Algorithm. Journal of Nano and Electronic physics. Vol 13, pp 02004-1 – 02004-5 | View |
| 34 | Akash Ahlawat, Ravinder Kumar Sahdev, R.K. Gupta, Deepak Chhabra (2021). 3D FDM Printable Polymer Composites and Polymer Nanocomposites: State of the Art . Journal of Nano and Electronic physics. Vol 13, pp 02020-1 – 02020-4 . | View |
| 35 | Upender Punia, Ashish Kaushik, Ramesh Kumar Garg, Deepak Chhabra, Anmol Sharma, “3D printable biomaterials for dental restoration: A systematic review” Materials Today: Proceedings, 2022, https://doi.org/10.1016/j.matpr.2022.04.018. | View |
| 36 | Khangwal, I., Chhabra, D., Shukla, P. “Multi-Objective Optimization Through Machine Learning Modeling for Production of Xylooligosaccharides from Alkali-Pretreated Corn-Cob Xylan Via Enzymatic Hydrolysis” Indian Journal of Microbiology, 2021 | View |
| 37 | Adlakha, S., Yadav, D., Garg, R.K., Chhabra, D. “Quest for dexterous prospects in AI regulated arena: Opportunities and challenges in healthcare” International Journal of Healthcare Technology and Management, 2020, 18(1-2), pp. 22–50. | View |
| 38 | Dixit M, Kumar Gupta G, Yadav M, Chhabra D, Kumar Kapoor R, Pathak P, Bhardwaj NK, Shukla P. Improved deinking and biobleaching efficiency of enzyme consortium from Thermomyces lanuginosus VAPS25 using genetic Algorithm-Artificial neural network based tools. Bioresour Technol. 2022 Feb 11;349:126846. doi: 10.1016/j.biortech.2022.126846. | View |
| 39 | Ashish Phogat, Deepak Chhabra, Vikas Sindhu, Akash Ahlawat. Analysis of wear assessment of FDM printed specimens with PLA, multi-material and ABS via hybrid algorithms. Materials Today: Proceedings, 28(4), Pages 2498-2500 https://doi.org/10.1016/j.matpr.2022.01.429 | View |
| 40 | Anmol Sharma, Deepak Chhabra, Ravinder Sahdev, Ashish Kaushik, Upender Punia, “Investigation of wear rate of FDM printed TPU, ASA and multi-material parts using heuristic GANN tool. ” Materials Today: Proceedings, 2022, https://doi.org/10.1016/j.matpr.2022.04.015. | View |
| 41 | Lalit Kumar, Kamal Kumar, Deepak Chhabra, “Experimental investigations of electrical discharge micro-drilling for Mg-alloy and multi-response optimization using MOGA-ANN, CIRP Journal of Manufacturing Science and Technology, ,2022, Volume 38Pages 774-786, (Impact Factor- 3.560). https://doi.org/10.1016/j.cirpj.2022.06.014 | View |
| 42 | Ashwani Kumar, Deepak Chhabra , “Adopting additive manufacturing as a cleaner fabrication framework for topologically optimized orthotic devices: Implications over sustainable rehabilitation” (2022), Cleaner Engineering and Technology Volume 10, October 2022, 100559 | View |
| 43 | A. Kumar and D. Chhabra, “Practicing Topology Optimization Workflow for Structural Simulation and Customized Splint Fabrication,” 2022 International Conference on Computational Modelling, Simulation and Optimization (ICCMSO), Pathum Thani, Thailand, 2022, pp. 84-88, doi: 10.1109/ICCMSO58359.2022.00029. | View |
| 44 | M. Yadav et al., “Enhancing dimensional accuracy of small parts through modelling and parametric optimization of the FDM 3D printing process using GA-ANN,” 2022 International Conference on Computational Modelling, Simulation and Optimization (ICCMSO), Pathum Thani, Thailand, 2022, pp. 89-94, doi: 10.1109/ICCMSO58359.2022.00030. | View |
| 45 | D. Chhabra et al., “3D Printable NiTi Alloys for Biomedical Applications: A State of Art,” 2022 International Conference on Computational Modelling, Simulation and Optimization (ICCMSO), Pathum Thani, Thailand, 2022, pp. 301-306, doi: 10.1109/ICCMSO58359.2022.00066. | View |
| 46 | A. Kaushik, S. Gahletia, R. K. Garg, P. Sharma, D. Chhabra and M. Yadav, “Advanced 3D body scanning techniques and its clinical applications,” 2022 International Conference on Computational Modelling, Simulation and Optimization (ICCMSO), Pathum Thani, Thailand, 2022, pp. 352-358, doi: 10.1109/ICCMSO58359.2022.00074. | View |
| 47 | A. Kumar and D. Chhabra, “Topological Simulation to Recognize the Steady State Thermal Behavior of Customized Finger Splint,” 2022 International Conference on Computational Modelling, Simulation and Optimization (ICCMSO), Pathum Thani, Thailand, 2022, pp. 320-324, doi: 10.1109/ICCMSO58359.2022.00069. | View |
| 48 | Deepak Chhabra; Sandeep Deswal; Ashish Kaushik; Ramesh Kumar Garg; András Kovács; Rohit Khargotra; Tej Singh “Analysis of fused filament fabrication parameters for sliding wear performance of carbon reinforced polyamide composite material fabricated parts using a hybrid heuristic tool” Polymer Testing Volume 118, 15 January 2023, 107910. | View |
| 49 | Mohit Yadav; Surendra Kumar; Ashish Kaushik; Deepak Chhabra ” Piezo-beam Structure in a Pipe with Turbulent Flow as Energy Harvester: Mathematical Modeling and Simulation ” J. Inst. Eng. India Ser. D (2022). https://doi.org/10.1007/s40033-022-00440-z | View |
| 50 | Mandeep Dixit; Deepak Chhabra; Pratyoosh Shukla ” Optimization of endoglucanase-lipase-amylase enzyme consortium from Thermomyces lanuginosus VAPS25 using Multi-Objective genetic algorithm and their bio-deinking applications” Bioresource Technology Volume 370, February 2023, 128467 | View |
| 51 | Mohit Yadav, Surendra Kumar, Ashish Kaushik, Ramesh Kumar Garg, Akash Ahlawat, Deepak Chhabra, “Modeling and Simulation of Piezo-beam Structure Mounted in a Circular Pipe using Laminar Flow as Energy Harvester,” International Journal of Engineering Trends and Technology, vol. 71, no. 2, pp. 296-314, 2023. Crossref, https://doi.org/10.14445/22315381/IJETT-V71I2P232 | View |
| 52 | Anil Kumar, Farheen Naz, Sunil Luthra, Rajat Vashistha, Vikas Kumar, Jose Arturo Garza-Reyes, Deepak Chhabra (2023) “Digging DEEP: Futuristic building blocks of omni-channel healthcare supply chains resiliency using machine learning approach” Journal of Business Research, 2023, 162, 113903 | View |
| 53 | Ravin Sehrawat, Ravinder Kumar Sahdev, Deepak Chhabra, Sumit Tiwari, Rohit Khargotra, Tej Singh, Manisha (2023) “Environmental and economic management study of phase change material integrated bifacial photovoltaic thermal-greenhouse drying system: A thermal approach” Energy Conversion and Managementthis , 2023, 286, 117065 | View |
| 54 | Sumit Gahletia, Ashish Kaushik, Ramesh Kumar Garg , Deepak Chhabra, András Kovács, Rohit Khargotra, Tej Singh “Fabrication and analysis of micro carbon fiber filled nylon filament reinforced with Kevlar, Fiberglass, and HSHT Fiberglass using dual extrusion system” Materials Today Communications, 2023, 35, 106075 | View |
| 55 | Ravin Sehrawat, Ravinder Kumar Sahdev, Deepak Chhabra, Sumit Tiwari (2023) “Experimentation and optimization of phase change material integrated passive bifacial photovoltaic thermal greenhouse dryer” Solar Energy, 2023, 257, pp. 45–57 | View |
| 56 | Manisha, Sumit Tiwari, Deepak Chhabra, Meena Kumari, Prabhakar Tiwari & Ravinder Kumar Sahdev (2023) “Recent developments on photovoltaic thermal drying systems: a clean energy production”Clean Technologies and Environmental Policy, 2023 . | View |
| 57 | Arshad Ali, Meena Kumari, Jitender Singh Laura, Mohammad Rizwanullah, Manisha, Deepak Chhabra & Ravinder Kumar Sahdev (2023)”Optimal composition of biomass pellet for enhancing calorific value using MOGA-ANN: a mixture of paddy straw, sawdust, cow dung, and paper pulp” Biomass Conversion and Biorefinery, https://doi.org/10.1007/s13399-023-04490-5 | View |
| 58 | Akash Ahlawat, Ashish Phogat, Mohit Yadav, Ravinder Kumar Sahdev, Ashwani Kumar Dhingra & Deepak Chhabra (2023) “Fabrication and analysis of ABS-HDPE-PC composite polymer filament used for FDM printing using hybrid algorithm” Int J Interact Des Manuf (2023). https://doi.org/10.1007/s12008-023-01389-3. | View |
| 59 | Ashwani Kumar & Deepak Chhabra (2023) Parametric topology optimization approach for sustainable development of customized orthotic appliances using additive manufacturing, Mechanics of Advanced Materials and Structures, DOI: 10.1080/15376494.2023.2214908 | View |
| 60 | Kumar, A. and Chhabra, D. (2023), “Multidisciplinary topology and material optimization approach for developing patient-specific limb orthosis using 3D printing”, Rapid Prototyping Journal. https://doi.org/10.1108/RPJ-12-2022-0435 | View |
| 61 | Yadav, K., Rohilla, S., Ali, A. et al. Effect of Speed, Acceleration, and Jerk on Surface Roughness of FDM-Fabricated Parts. J. of Materi Eng and Perform (2023). https://doi.org/10.1007/s11665-023-08476-2 | View |
| 62 | Vicky Saharan, Surya Tushir, Jagdeep Singh, Naveen Kumar, Deepak Chhabra & Rajeev Kumar Kapoor (2023) “Application of MOGA-ANN tool for the production of cellulase and xylanase using de-oiled rice bran (DORB) for bioethanol production” Biomass Conversion and Biorefinery. https://doi.org/10.1007/s13399-023-04022-1 | View |
| 63 | Pardeep Kumar, Ashwani Kumar Dhingra∗ , Deepak Chhabra and Ashish Chhikara “Multi-objective parameter optimization for four-stroke single-cylinder diesel engine with soyabean oil blends using NSGA-II” Engineering Research Express, Volume 5, Number 4 | View |
| 64 | Arshad Ali, Deepak Chhabra, Meena Kumari, Manisha, Pinkey, Sumit Tiwari & Ravinder Kumar Sahdev. Optimization and characterization of hybrid bio-briquettes produced from the mixture of sawdust, sugarcane bagasse, and paddy straw. Environ Sci Pollut Res (2024). https://doi.org/10.1007/s11356-024-32171-x | View |
| 65 | Mohneesh Kalwani, Arti Kumari, Shalini G. Rudra, Deepak Chhabra, Sunil Pabbi, Pratyoosh Shukla (2024), Application of ANN-MOGA for nutrient sequestration for wastewater remediation and production of polyunsaturated fatty acid (PUFA) by Chlorella sorokiniana MSP1, Chemosphere, Volume 349, 2024, 140835, ISSN 0045-6535, https://doi.org/10.1016/j.chemosphere.2023.140835. | View |
| 66 | Anubhuti Kawatra, Deepak Chhabra, Pooja Gulati (2024), Cross-linked arginine deiminase aggregates for enhanced production of nutraceutical citrulline, Process Biochemistry, Volume 136, 2024, Pages 147-155, ISSN 1359-5113 https://doi.org/10.1016/j.procbio.2023.11.015. | View |
| 67 | Kumar, P., Dhingra, A.K., Chhabra, D. et al. Multi-objective Parameter Optimization of Four-Stroke Diesel Engine with Waste Cooking Oil Biodiesel and Diesel Blend using RSM-NSGA-II. Natl. Acad. Sci. Lett. (2024). https://doi.org/10.1007/s40009-023-01376-y | View |
| 68 | Ali, A., Kumari, M., Manisha et al. Insight into the Biomass-Based Briquette Generation from Agro-Residues: Challenges, Perspectives, and Innovations. Bioenerg. Res. (2024). https://doi.org/10.1007/s12155-023-10712-5 | View |
| 69 | Guddu Kumar Gupta, Rajeev Kumar Kapoor, Deepak Chhabra, Nishi Kant Bhardwaj, Pratyoosh Shukla “Synergistic effect of cellulo-xylanolytic and laccase enzyme consortia for improved deinking of waste papers” Bioresource Technology Volume 408 , September 2024, 131173. | View |
| 70 | Ashwani Kumar & Deepak Chhabra “Hybrid machine learning approach for accurate and expeditious 3D scanning to enhance rapid prototyping reliability in orthotics using RSM-RSMOGA-MOGANN” Artificial Intelligence for Engineering Design, Analysis and Manufacturing. 2024;38:e7. doi:10.1017/S0890060424000064 | View |
| 71 | Narang, R. , Kaushik, A. , Dhingra, A.K. , Chhabra, D. “Post-Treatment and Hybrid Techniques for Prolonging the Service Life of Fused Deposition Modeling Printed Automotive Parts: A Wear Strength Perspective” SAE International Journal of Materials and Manufacturing, 2024, 17(2) | View |
| 72 | Deswal, S., Kaushik, A., Garg, R.K. et al. Optimization of fused deposition modelling printing parameters using hybrid GA-fuzzy evolutionary algorithm. Sādhanā 49, 257 (2024). https://doi.org/10.1007/s12046-024-02595-9 | View |
| 73 | Chhikara, A. , Dhingra, A.K. , Chhabra, D. , Kumar, P. “Optimization of biodiesel production of spirulina-platensis algae biomass using RSM integrated with whale optimization algorithm” Indian Journal of Engineering and Materials Sciences , 2024, 31(5), pp. 750–758 | View |
| 74 | Shazman Nabi, Manu Srivastava, Mohammad Farooq Wani, Sandeep Rathee, Deepak Chhabra, “Exploring tribological and corrosion properties of Al-5052/SiC+CeO2 hybrid surface composites fabricated using friction stir processing” Tribology International, Volume 201, 2025, 110176, ISSN 0301-679X, | View |
| 75 | Anubhuti Kawatra, Rakhi Dhankhar, Bharti Datten, Shweta Dhankhar, Deepak Chhabra, Pooja Gulati “Integrated neural network and PSO hybrid approach for production of citrulline using immobilized permeabilized Pseudomonas furukawaii” Letters in Applied Microbiology, Volume 77, Issue 12, December 2024, ovae111, https://doi.org/10.1093/lambio/ovae111 | View |
| 76 | Manisha, Sumit Tiwari, Ravinder Kumar Sahdev, Deepak Chhabra, Meena Kumari, Arshad Ali, Ravin Sehrawat , Prabhakar Tiwari “Advancements and challenges in battery thermal management for electric vehicles” Renewable and Sustainable Energy Reviews, Volume 209, March 2025, 115089. | View |
| 77 | Govind Vashishtha; Sumika Chauhan; Nitin Yadav; Deepak Chhabra; Munish Kumar Gupta; Rajesh Kumar; Zhixiong Li “Shaping the future: latest developments in 3D printing stimuli-responsive soft polymers” International Journal of Advanced Manufacturing Technology, Volume 136, pages 4215–4237, (2025) | View |
| 78 | Manu Rathee; Sarthak Singh Tomar; Deepak Chhabra; Pritish Dixit “Digital workflow for fabricating a nasal apex-columella prosthesis with an integrated custom nasal stent” The Journal of Prosthetic Dentistry, February 15, 2025 | View |
| 79 | Akash Ahlawat; Ashish Phogat; Upender Punia; Ashish Chhikara; Ashwani Kumar Dhingra; Ramesh Kumar Garg; Ravinder Kumar Sahdev; Deepak Chhabra, “Innovative Optimization of Mechanical Performance in Carbon Fiber-Reinforced Nylon Composite Using Artificial Neural Networks and Multi-Objective Genetic Algorithms” Journal of Materials Engineering and Performance, (2025) | View |
| 80 | Rajan Narang; Akash Ahlawat; Ashwani Kumar Dhingra; Ravinder Kumar Sahdev; Deepak Chhabra, “Optimization of Process Parameters to Investigate the Fatigue Behavior of Fused Deposition Modeling-Fabricated ABS Parts Using Hybrid Tool” Journal of Materials Engineering and Performance, (2025) | View |
| 81 | FAROOZ NAJAR; Sandeep Rathee; Manu Srivastava; Deepak Chhabra, “Surface Modification and Properties Enhancement of AA6082 Using Multi-Pass Friction Stir Processing” Metals and Materials International, 20 February 2025 | View |
| 82 |
Conference Papers
| S. No | Paper | Link |
| 1. | Vishal et al., “Indoor Forced Convection Drying of Giloy Stem: An Experimental Investigation,” 2024 3rd International Conference on Computational Modelling, Simulation and Optimization (ICCMSO), Phuket, Thailand, 2024, pp. 319-324, doi: 10.1109/ICCMSO61761.2024.00071. | View |
| 2 | A. K. Dhingra et al., “Driving Design and Performance of Dental Restorations through Next-Generation Additive Manufacturing Resins,” 2024 3rd International Conference on Computational Modelling, Simulation and Optimization (ICCMSO), Phuket, Thailand, 2024, pp. 344-349, doi: 10.1109/ICCMSO61761.2024.00075. | View |
| 3 | D. Chhabra, A. Kumar Dhingra, A. Kaushik, S. Dhingra, R. Kumar Sahdev and S. Dhingra, “Transforming dentistry using artificial intelligence based innovations for advanced diagnostics and sustainable healthcare,” 2024 3rd International Conference on Computational Modelling, Simulation and Optimization (ICCMSO), Phuket, Thailand, 2024, pp. 176-181, doi: 10.1109/ICCMSO61761.2024.00045. | View |
List of Chapter Published
| S.No. | Detail | Link |
| 1. | R Vashistha, D Yadav, D Chhabra, P Shukla (2019). Artificial intelligence integration for neurodegenerative disorders. Leveraging Biomedical and Healthcare Data, 77-89. | View |
| 2. | S Adlakha, D Chhabra, R Vashistha (2020). Efficacious Study of Specific Co-Creation Policies in the Healthcare Ecosystem: The Synergy Between Healthcare Providers, Policymakers, and Seekers. Technological Innovations for Sustainability and Business Growth, 199-220. | View |
| 3 | Yadav, M., Yadav, D., Garg, R.K., Gupta, R.K., Kumar, S., Chhabra, D. (2021). Modeling and Optimization of Piezoelectric EnergyHarvesting System Under Dynamic Loading. Advances in Fluid and Thermal Engineering. Lecture Notes in Mechanical Engineering. Pages 339-353. | View |
| 4 | Anmol Sharma, Pushpendera S. Bharti, Ashish Kaushik, Upender Punia, Ramesh Kumar Garg, Mohit Yadav, Deepak Chhabra, Abhi Bansal (2023) ” 3D Printable titanium alloys and their properties in biomedical applications: state of the art ” Mechanical Properties and Characterization of Additively Manufactured Materials, CRC Press 9781003430186 . | View |
| 5. | Kaushik, A. , Punia, U. , Gahletia, S. , Garg, R.K. , Chhabra, D. (2023) Identification and Overcoming Key Challenges in the 3D Printing Revolution .3D Printing and Sustainable Product Development Edition1st Edition First Published 2023 Imprint: CRC Press Pages 87-1-4. eBook ISBN9781003306238 | View |
| 6. | Punia, U., Kaushik, A., Garg, R.K., Sharma, A., Chhabra, D. Additive manufacturing requirements for dental implementation. 3D Printing and Sustainable Product Development Edition1st Edition First Published 2023 Imprint: CRC Press Pages 151-171. eBook ISBN9781003306238 | View |
| 7 | Dinesh, Neha, Deepak Chhabra, R. K. Garg, Rajkumar Yadav, Sunil Kumar Sharma ;Integration of Information and Communication Technologies in Mechanical Engineering, Virtual Lifelong Learning: Educating Society with Modern Communication Technologies (2024) 1: 149. https://doi.org/10.2174/9789815196566124010014. Bentham Science Publisher | View |
List of Refereed Publications
| Sr.No. | Paper | Link |
| 1 | Deepak Chhabra, Pankaj Chandna, Gian Bhushan, “Design and Analysis of Smart Structures for Active Vibration Control using Piezo-Crystals”. International Journal of Engineering and Technology Volume 1 No. 3, December, 2011, ISSN2049-3044. | View |
| 2 | Deepak Chhabra, Gian Bhushan, and Pankaj Chandna, “Optimization of Collocated/Noncollocated Sensors and Actuators along with Feedback Gain Using Hybrid Multiobjective Genetic Algorithm-Artificial Neural Network,” Chinese Journal of Engineering, vol. 2014, Article ID 692140, 12 pages, 2014. doi:10.1155/2014/692140. | View |
| 4 | Pardeep Singh, Deepak Chhabra, “Design and Analysis of Smart Cantilever Plate Structures for Active Vibration Control using Piezoelectric Sensor and Actuator” International Journal of Mobile & Adhoc Network, Vol2: issue 2, May 2012, ISSN (Online) 2231–6825. ISSN (Print) 2249-202X pp. 312-320. | View |
| 5 | Kapil Narwal, Deepak Chhabra, “Analysis of simple supported plate for active vibration control with piezoelectric sensors and actuators” IOSR Journal of Mechanical and Civil Engineering Volume 1, Issue 1 (May-June 2012), PP 26-39(IOSRJMCE) ISSN : 2278-1684pp26-39 | View |
| 6 | Deepak Chhabra, Kapil Narwal, Pardeep Singh “Design and Analysis of Piezoelectric Smart Beam for Active Vibration Control” , International Journal of Advancements in Research & Technology, Volume 1, Issue1, June-2012, ISSN 2278-7763. | View |
| 7 | Amit Kumar, Deepak Chhabra “Design of Neural Network Controller for Active Vibration control of Cantilever plate with piezo-patch as sensor /actuator” International Journal of Modern Engineering Research (IJMER) www.ijmer.com Vol. 3, Issue. 4, Jul – Aug. 2013 pp-2481-2488 ISSN: 2249-6645. | View |
| 8 | Varun Kumar, Deepak Chhabra, “Design of Fuzzy Logic Controller for Active Vibration Control of Cantilever Plate with Piezo -Patches As Sensor /Actuator” International Journal of Emerging Research in Management &Technology ISSN: 2278-9359 (Volume-2, Issue-8) August 2013. | View |
| 9 | Mohit, Deepak Chhabra, Suresh Kumar, “Intelligent Controllers/Adaptive Controllers for Active Vibration Control in Different Structures/Systems-A Review”, International Journal of Latest Technology in Engineering, Management & Applied Science, Volume III, Issue V, May 2014, ISSN 2278 – 2540. | View |
| 10 | Neeraj Sehgal, Monu Malik, Deepak Chhabra, “Meta-heuristics Approaches for the Placement of Piezoelectric actuators/Sensors on a Flexible Cantilever Plate: A Review” International Journal of Enhanced Research In Science Technology & Engineering, Vol. 3, Issue 6, June, 2014, pp: (7-16),ISSN: 2319-7463. | View |
| 11 | Neeraj Sehgal and Deepak Chhabra (Sep 2014), “Modeling and Simulation of a Plate with Piezo-Patches as Sensors/Actuators Using LQG Modal Control & Comparison with Classical Controller” International Journal for Scientific Research & Development, Vol.2 , Issue 6: 4-13. | View |
| 12 | Kumar, Sandeep, Deepak Chhabra, and Pawan Kumar. “Design and Stress Analysis of Steering Rack Using CAE Tool.” International Journal of Advances in Engineering Sciences 4.3 (2014): 12-15. | View |
| 13 | Sandeep Kumar, Deepak Chhabra, Pawan Kumar, “Design and Optimization of Steering rack using CAE Tool” International Journal of Enhanced Research In Science Technology & Engineering, Vol. 3, Issue 6, June, 2014, pp: (106-110),ISSN: 2319-7463. | View |
| 14 | Kumar, A., Kumar, A. and Chhabra, D. (2014). “Analysis of smart structures with different shapes of piezoelectric actuator.” International Journal of R&D in Engineering, Science and Management 1(2): 60-71. | View |
| 15 | Mohit, Deepak Chhabra, and Suresh Kumar, “Active Vibration Control of the Smart Plate Using Artificial Neural Network Controller,” Advances in Aerospace Engineering, vol. 2015, Article ID 137068, 20 pages, 2015. doi:10.1155/2015/137068 | View |
| 17 | Kumar, N. and Chhabra, D. (2016). “Implementation of Fire Fighting and Safety in Warehouse.” International Journal of R&D in Engineering, Science and Management 3(7): 193-207. | View |
| 18 | Rani, P. and Chhabra, D. (2016). “Piezoelectric Energy Harvesting from Fluid Flow Dynamism using PVDF.” International Journal of R&D in Engineering, Science and Management 4(1): 23-36. | View |
| 19 | Budhwar, A. and Chhabra, D. (2016). “Comparison of Energy Harvesting using Single and Double Patch PVDF with Hydraulic Dynamism.” International Journal of R&D in Engineering, Science and Management 4(1): 56-67. | View |
| 20 | Deepak Chhabra (June-2016). “Optimization of an Automotive Rear Dead Axle using CAE Tool.” International Journal of R&D in Engineering, Science and Management 4(2): 18-24. | View |
| 21 | Ashwani Kumar and Deepak Chhabra (June-2016) “Study of PEH Configurations & Circuitry and Techniques for Improving PEH Efficiency” International Journal for Scientific Research & Development, Vol.4 , Issue 3: pp.2098-2102. | View |
| 22 | Ashwani Kumar and Deepak Chhabra (July-2016) “Recent Developments in the Field of Piezoelectric Energy Harvesting & Advanced MEMS: An Overview” International Journal for Scientific Research & Development, Vol.4 ,Issue 4: pp.1536-1540. | View |
| 23 | Ashwani Kumar and Deepak Chhabra (August-2016) “Fundamentals of Piezoelectric Energy Harvesting” International Journal for Scientific Research & Development, Vol.4 , Issue 5: pp.1168-1171. | View |
| 25 | Sanchita Abrol and Deepak Chhabra (June 2017). “Harvesting Piezoelectricity using Different Structures by Utilizing Fluid Flow Interactions.” International Journal of R&D in Engineering, Science and Management 5(7): 24-36. | View |
| 26 | Ankit Singroha and Deepak Chhabra (2017). “Analysis of Piezo Polymer Energy Harvesting in Different Applications via Diverse Circuits.” International Journal of R&D in Engineering, Science and Management 5(7): 121-135. | View |
| 27 | Nitin Yadav and Deepak Kumar (July 2017) “To Harveste Electric Energy From Hydro Piezoelectric System.” International Journal of Engineering Technology and Computer Research (IJETCR) Volume 5; Issue 4; July-August: 2017; Page No. 54-62. | |
| 28 | Vikram, Deepak Chhabra, “Design and analysis of mechanism to apply periodic dynamic load on PVDF”,International Journal Of Latest Trends In Engineering And Technology, Volume 8 Issue 4-1 – August 2017, 250-257. | View |
| 29 | Sandeep, Deepak Chhabra, “Comparison and analysis of different 3d printing techniques”, International Journal Of Latest Trends In Engineering And Technology, Volume 8 Issue 4-1 – August 2017, 264-272. | View |
| 30 | Rajan Narang, Deepak Chhabra “Analysis of Process Parameters of Fused Deposition Modeling (FDM) Technique” International Journal on Future Revolution in Computer Science & Communication Engineering, Volume: 3 Issue: 10 pp.41 – 48 ISSN: 2454-4248. | View |
| 31 | Anil Kumar, Deepak Chhabra (2018)“ Wearable Biosensor Technology—An Innovative Review” Research & Reviews: Journal of Medical Science and Technology, Volume: 7 Issue: 1 pp.1 – 8 ISSN: 2349-1272. | View |
| 32 | Ashwani Kumar, Deepak Chhabra (2018)“ Mehanobiological Aspects of Biosensors Applications In Personalized Healthcare” International Journal of Latest Trends in Engineering and Technology, Volume: 9 Issue: 4 pp.229 – 231 ISSN: 2478-621X. | View |
| 33 | Nitin Yadav, Deepak Chhabra (2018)“ Design and Analysis of Closed Flow System with Varying Various Parameters of Hydrodynamics for PEH” Journal of Control & Instrumentation, Volume: 3 Issue: 10 pp.41 – 48 ISSN: 2454-4248. | View |